300M input shaft
2.93 gears preferably but can take other ratio as well.
7/8 chain minimum but prefer 1" GMR
etc...
Let me know what you got by PM.
Thanks,
Ben
|
300M input shaft
2.93 gears preferably but can take other ratio as well.
7/8 chain minimum but prefer 1" GMR
etc...
Let me know what you got by PM.
Thanks,
Ben
TR's trans 5 years in the making
3.29 1" gmr custom teflon slides
Armet IS
Modified pump shaft and ported pump
300m output
Billet 3rd drum
Gxp/LS4 gearset
Billet PI lockup converter with custom T400sbc tcc oring design, 3000 stall at 700 ftlbs
3ep valvebody with full pressure/flow mods for 3rd and tcc.
Will handle 800+ hp reliably (we hope)
I'd say we'd probably sell it for about $8000
Or you can use a 250$ 4t80e
pm sent
« Previous Thread | Next Thread » |