Hey everyone, New guy here from Michigan, just bought a 2006 GT...looking for a PLOG and Downpipe....or a set of used headers in good condition..
thanx
KirK
|
|
07-06-2014
Hey everyone, New guy here from Michigan, just bought a 2006 GT...looking for a PLOG and Downpipe....or a set of used headers in good condition..
thanx
KirK
Last edited by KIRKADAMS; 07-06-2014 at 12:22 AM.
07-06-2014
Speed daddy headers are back in stock at 217 shipped. Cheapest headers you'll get lots of guys use them zero complaints
Originally Posted by theaceofspades
07-06-2014
Thank you much, I will check them out tonight!
07-07-2014
I have a 3" catted zzp downpipe with 2.5" exit for stock cat back. $150 plus shipping
07-07-2014
I bought the Speed Daddy headers last night....
07-07-2014
hopefully you made an offer of $197...... And got free shipping.
If you didn't. oh well. Good man on going with the SD's
07-07-2014
Made an offer of 200...with free shipping
07-07-2014
close enough lol
07-08-2014
I would like to recommend buying 2 band clamps 2.5" and 2 band clamps 3"
07-08-2014
Im gonna buy everything tomorrow, is this everything I need? The exhaust on the car is stock
07-08-2014
are the clamps bad that come with the Speed Daddy Headers ?
07-08-2014
People told me to do the band clamps, I did 2 and ended up blowing my exhaust apart at the last clamp spot before the flange of the catback. But my exhaust also moves a lot more than it probably should. I put a band clamp on that spot and it's fine now. Plus, if you don't use the band clamps you will have exhaust leaks. I can see where I didn't have band clamps I have little black soot spots
07-08-2014
theres two types of band clamps i know of.
this kind that is formed for the step up of where the pipes meet up.
or the flat kind, both will work.
07-08-2014
I got the flat ones. As Scotty stated, they work fine. They are the only ones I could find
07-08-2014
cool, im on it, thanx guys, I appreciate it!
07-08-2014
flat was all i could find local too. my pipe was coming out of my res, so it got a band clamp and never came off again.
07-08-2014
Copper rtv and you may need a o2 extension.
07-09-2014
I needed an 02 extension for the upstream 02. Thanks RED for posting about that because I forgot that I needed one. I didn't use copper rtv but may not be a bad idea
07-09-2014
you can make your own. cut the harness side o2 plug off, then stretch the wires to make the factory harness longer. those wires are all copper and can be soldered. if you cut the o2 sensor plug off theres a ss wire that you cant solder.
07-24-2014
Doing the headers and the basics this weekend, finally have everything... headers, clamps, new o2 and extender, plugs, wires, 180 t-stat, lower motor mount and trans mount, supercharger oil......Do I need to flip the swaybar with SD headers on my 06 ?
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
