Thread: TOG or ZZP headers

Looking for a used set of either of these. Just need the TOG to be the 1.75" primaries. $500 if it comes with a downpipe with 2.5" exit.

Why not get the speed daddy headers or slp? The can be had for under $200

Well the car I just bought has the SD headers on it. But plans are a XP cam, intercooler, and gen v swap. Doubt the SD headers could give the flow I need.

Originally Posted by 1nastyss

Well the car I just bought has the SD headers on it. But plans are a XP cam, intercooler, and gen v swap. Doubt the SD headers could give the flow I need.

yes they will.

dont waste your money when you already have headers on the car.

For clarification, I think you're looking for TOG Xtremes.
As I understand the sizes to be:

Primaries:
Speed Daddy: 1.5"
S&S: 1.625
SLPs: 1.625"
SAC/XS/DPP: 1.625"
TOG: 1.625"
Pacesetters/OBX: 1.625 or 1.75"
TOG Xtreme: 1.75"
ZZP: 1.75"
WBS: 1.75"
TOG Big Dog: 2.00"

All the same, your setup will be fine and safe with the Speed Daddy's. It may improve with better headers, though.

ClubGP Message Forum troubleshooting80 for the togs

FWIW I ran

S1X
1.8RR
S3 Heads
Gen V 2.8/2.9" pullies
EWP
Ported LIM
N* TB
4" intake
LQ4 Maf
Titanium retainer
130# springs

on SLP's. no flow issues at all. My biggest flow issue was that the last 4 feet of my exhaust was 2.5" stock with the stock Bonneville (high flow, low noise) muffer. And even that wasn't much of a restriction if you ask those that rode in the car.

Thanks guys, guess I will stick with the speed daddy headers and get on the xp cam parts list.