From what everyone says, retrofits are the best way to go. I wouldn't know since one of my retrofit headlights was lost in the mail.......
Printable View
From what everyone says, retrofits are the best way to go. I wouldn't know since one of my retrofit headlights was lost in the mail.......
Where from?Quote:
Originally Posted by highoctaneracing
Michigan. Conrad sold his last set of retros and lost one in the mail. USPS is still looking for it
Install one side :)
No sir. 5k HIDs in both headlights and fog lights. Those are properly aimed low beams. Notice how it's not throwing light up but it is going down the road. As seen by that reflecting road sign half a mile down the road.Quote:
Originally Posted by ITHURTZ
I got one of the projector headlight sets off eBay. They are all made by Sonar to some extent. Mine were the Eagle Eye ,but, had Sonar marked on the projectors. I went through 3 ballasts on one light for my CCFL Halos before I got one that worked fine. You have to really crank the adjusters all the way to get them somewhat straight....and then that causes them to set in the headlight area cocked. Its a shame, because if they would have done just a little more work on these, they would have been a great set of lights. Was it an improvement over stock? ABSOLUTELY. Could it have been better? ABSOUTELY.
Here... I'll leave this here http://youtu.be/f2gEUQuoY4I
Here is a set
https://www.youtube.com/watch?v=9QMb...3ZLLH8NW6OLtNQ
To further on my post, I will be doing a set of retros with high beam actuators in the future.....if that tells you anything.