Ok, so I installed HID in headlights and fogs maybe a year or two ago. About 4-6 months after that my right fog light became temperamental and eventually ceased to function. I am think that some water got in and fried the bulb. I finally have a new set to install, but I'm wondering if there is a better way to wire these up. The bulbs plug into the ballast fine but only have two leads not the actual end of a plug so on the last set I used a liberal amount of electrical tape to hold them in place and attempt to seal out any water. Oddly enough now I think my left headlight is starting to go out as it is getting more purple and slower to turn on so that will need replaced soon too
Btw I'm using a DDM 35w 880 set
