GP seats

I used a 19/32 six point 1/2" drive socket and breaker bar to get mine loose. Worse case, try a electric impact.

Quote:

---

Originally Posted by Scottydoggs

thats pretty damn tight then. you using 6 point sockets? try a standard socket, maybe it will hold better.

i would avoid cutting the heads off, then you have the threads stuck in the hole. then try to drill it out, and re tap the threads.

both side are this tight, d river and pass seats?


silly but, your turning the bolts the right way?

---

I didnt try the driver side.
The reason im trying to get it out is cz i used to have water on the floor board so the airbags module got bad.

I got one from a junk yard ( i took the seat out the right way :) )
But now cant get mine out.

Theres a piece of metal between so ill try to move it with a hammer.