I have been planning this mod for a while and finally got it completed. I not have real 2+2 Seating. The real reason for this mod was a place to put my rear heated seat and rear lumbar switches for the mods that i have added.
So i originally started with a mini console that honestly kinda of sucked
so that began the development of a full length center.
Started with a template of a front console
from the cardboard to the physical console
Because of the curvy shape i needed to add some length to make it match the existing console
Peeled the material back and made the first cut
Once the length was correct it was time to make the cuts to fit in into the car
Everything wrapped and the vents plus the 12V outlet fitted into the car
So this means the seat has to be cut...
and the cover has to be modified
Finally making the top plastics
03+ Cupholder
shifter plate for the heated seat switches and the lumbar switches
and the 00-02 cupholder flipped around
