if i got a gen 2 and went to a jy and got a deck lid and drilled new holes the spoiler would cover the existing holes correct?
|
|
11-06-2012
if i got a gen 2 and went to a jy and got a deck lid and drilled new holes the spoiler would cover the existing holes correct?
11-07-2012
Pretty sure the answer is no... Why not look for an SE trunk lid that didn't come with a spoiler in the first place.
11-07-2012
Why do you need to drill new holes? It should use the existing holes.
11-08-2012
It will not cover the existing holes. You can go with the SLP version which sits a little higher on the trunk and uses the stock holes.
11-08-2012
i was just thinking if i could find one cheap on here and just go to a junk yard and find another trunk lid
11-08-2012
I have a special edition for sale if you're interested. And it will not cover the existing holes either.
11-14-2012
will not cover.
You can do what I did. When I went from a stock to a Daytona spoiler, I bought a deck lid w/o a spoiler from a junk yard. Then had the deck lid and SE spoiler painted silver. Then drilled and mounted
11-15-2012
What I did was drill the holes for the new spoiler and bondo over the existing holes that show. Got painters tape and taped around the holes I bondo'd. And painted the bondo area and wet sanded with a 1000 grit sponge. I also painted the spoiler beforehand and once everything was done put the spoiler on. But if you never did any kind of bondo or paint work I would take it to a professional.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
