Thread: Whats the best way to debadge?

I Was wondering the best way to get the "gtp supercharged" badge off of the side of my 99 gp without chipping paint, scratching etc.

I'm curious because i am going to be getting replacement badges from reflective concepts in a few months.

strong fishing line! get a long enough piece, hold tight w/ both hands, slide it between the car and the badge, and pull down!



i use my nail 2 get the residue off!

i've heard that you can take dental floss or like string material and run it behind the emblem to cut through the adhesive...then you'll have to get adhesive remover to remove the residue left behind

^that'd probably work to! then u can smell minty when doing it!

Thanks a bunch. Follow up question about the adhesive remover. Wouldn't something strong enough to remove the adhesive like goof off also strip the paint?

Originally Posted by DnaProdigy

Thanks a bunch. Follow up question about the adhesive remover. Wouldn't something strong enough to remove the adhesive like goof off also strip the paint?

I used a heat gun the last time I did it, I've also heard a blow dryer works pretty good just takes longer.

^^^test in a spot that is no very visible to see before trying anything like that on your paint.......but goo gone did help remove bumper stickers from my little bro's 1990 240 and we had no paint damage or hazing

just use a blowdryer to heat it up and pull it off. then use the blowdryer to keep the glue hot so you can take that off with your fingers. watch out, it gets hot.

Ok cool, i think ill try the heatgun, being extremely cautious not to heat it up too much. Thanks all.

Dental floss to remove the badge. Goo Gone makes a spray gel that likes to stay where you spray it specifically for automotive applications. I've used it lots and it has never hurt my paint. Works wonders, too.

Originally Posted by DnaProdigy

Ok cool, i think ill try the heatgun, being extremely cautious not to heat it up too much. Thanks all.

Even for the goo underneath just use a heat gun it makes it easy to just wipe or pull off piece by piece, might not be the fastest way but defiantly the cleanest.

make sure u wax the area after the sticky junk is off.......



u know why.

you can also go to ur local auto parts store and get "adhesive remover"...comes in a can similar to paint thiner or accetone...i used that when i de-lettered a trailer and it didn't eat the paint or anything like that

Thanks for all the help guys, very informative. Man now that i know how to do it i wish i was doing it tomorrow and not in a few months.

Originally Posted by DnaProdigy

Thanks for all the help guys, very informative. Man now that i know how to do it i wish i was doing it tomorrow and not in a few months.

Why are you waiting so long? They're all over the internet, plus you can get them from your dealership.

DON'T FORGET! You should take a picture or measure the place where the old badge was or it might not look right, I made the same mistake the first time and had mine up an inch to high. If you have a friend with a GTP it should be even easier.

Originally Posted by Street Wolf

For what it's worth. Every badge I have ever taken off... I've just grabbed it, and ripped it off by hand.


Then taken 'Goo Gone' to remove the junk.

Thanks, its good to know that i don't have to worry too much about messing up the paint especially if i am using a more delicate method.

Originally Posted by Dboy23

Why are you waiting so long? They're all over the internet, plus you can get them from your dealership.

DON'T FORGET! You should take a picture or measure the place where the old badge was or it might not look right, I made the same mistake the first time and had mine up an inch to high. If you have a friend with a GTP it should be even easier.

Thanks, yea i am going to order the two for the sides the front Pontiac symbol and the word "Pontiac" for the back from reflective concepts. Im am at school right now and im waiting a few months till i get home to do the job. Im also going to put on my "coming soon" mods in my sig. I cant wait but i decided not to put them on before school as my car is my DD and my school is 2 hours away from my home. Last thing i need happening is a problem when i am 2 hours away from a shop i can access for free.

Originally Posted by DnaProdigy

Thanks, yea i am going to order the two for the sides the front Pontiac symbol and the word "Pontiac" for the back from reflective concepts. Im am at school right now and im waiting a few months till i get home to do the job. Im also going to put on my "coming soon" mods in my sig. I cant wait but i decided not to put them on before school as my car is my DD and my school is 2 hours away from my home. Last thing i need happening is a problem when i am 2 hours away from a shop i can access for free.

No problem, I doubt anything can go bad with some badges so they shouldn't really matter, you never know the longer you wait the better things can get for you . Not sure if you looked into some colored ones to match your car, sometimes they don't look too bad. If you need anything else feel free to ask.

Originally Posted by Dboy23

No problem, I doubt anything can go bad with some badges so they shouldn't really matter, you never know the longer you wait the better things can get for you . Not sure if you looked into some colored ones to match your car, sometimes they don't look too bad. If you need anything else feel free to ask.

Thanks, yea i was more concerned with the other mods causing a difficulty [the plugs, 3.5pulley and 180* t-stat]. I was gonna wait so i can get all that and the badges done at the same time. I am most likely going to go with a yellow color scheme as my Break calipers are already yellow [the car is black]. I already priced it out and the badges/stickers i want [with the reflect dome] come out to be around $100.