|
|
12-19-2011
SO Ive searched and searched about HIDs and cant find anything on the installation of these. I got the kit from vvme with the relay, I know where all the connections go except the two wires coming off the relay itself. Not the ground and positive, there are 2 smaller wires coming off of the blue connector. where do these go?
Thank You
Last edited by Mrc728; 12-19-2011 at 05:57 PM.
12-19-2011
Pics? Do you have the connectors between your old lights and the harness hooked up?
12-19-2011
Dont have anything hooked up yet just tryin to find out before i start
12-19-2011
IMAG0227 | Flickr - Photo Sharing!
There is a red and black wire coming of the blue connecter not sure where these go, as you can see i have 3 blue connectors which ones do i hook up.
12-19-2011
Take the harness off and plug it straight to your stock harness. You don't need a relay harness.
But, that wire in your picture goes to nothing. Just leave it be.
12-20-2011
Got em hooked up, Is it normal for the ballast to buzz?
12-20-2011
Yes.Originally Posted by Mrc728
12-20-2011
the blue connector attached to the bulb does jack ****
the one that is in the back right is for the relay harness. also the moment i get a pair of bulbs i cut that rubber circle out and remove the extra connector so there is not any confusion
and i highly suggest a relay harness on any vehicle w/ a "conversion" kit like this one
especially if you are leaving the drl enabled
Originally Posted by TLSheff
12-20-2011
and your copyright crap was easy to break
Originally Posted by TLSheff
12-20-2011
^^^ that one the two is for bi-xenon bulbs
Originally Posted by TLSheff
12-20-2011
I had that same problem with my harness. Gave up on it and plugged it into the stock harness.
12-20-2011
Yeah I hood it up without the harness, everything works great, no idea what u mean by my copyright crap.
12-20-2011
try and right clcik on the flikr image
and good luck w/o the harness
Originally Posted by TLSheff
| « Previous Thread | Next Thread » |
