Hi I was wondering if anyone here knew about MUTH signal mirrors. I think they look sick but I just want to know if it is hard to wire them in or if I should have it done at the custom shop in town.
|
|
06-13-2011
Hi I was wondering if anyone here knew about MUTH signal mirrors. I think they look sick but I just want to know if it is hard to wire them in or if I should have it done at the custom shop in town.
06-13-2011
219$ is not worth it imho, wiring is easy tho.
06-15-2011
as far as im concerned they are worth it. I am still waiting for your link to work.
thanks for the responses guys
06-15-2011
I really do like the price of the Shark Racing ones. but do they come with the wires that are needed? all I see are the wires that are all ready connected to the lights
06-15-2011
FWIW, I found the wiring to be easy. You just need the front directional signal for the respective side run into the door panel. Ground you can get in the door. Then you put the LEDs on the mirrors.
Here's my little write up using different pods. But it's probably almost the same.
http://www.grandprixforums.net/how-l...ors-39801.html
06-15-2011
Ok so I read all the posts on your link. They look sick but I have almost no experience working on cars. So I am still confused on how to wire them in.
How do I run the wires from the passenger side to the drivers side to connect them?
Where do I even run the drivers side to?
And also how easy is it to pull the glass out? I was told that the clips usually break because the glass is not meant to come out.
06-17-2011
subscribed
Originally Posted by TLSheff
06-17-2011
the mirror glass? It's easy and no the stuff doesn't usually break. Although trying to put it back in..it's going to feel like you might break it.
Honestly I didn't have a lot of experience with stuff a few years ago. But if you can work with your hands and cut or dremel things a bit. You should be able to do this.
On the wiring, we'll need to find out where your directional wiring is located. In my regal I was able to find it right at the body control module by the drivers door under the dash. To run wiring, you pull the door panel and sneak it through the boot on the door just like GM did. Takes a little thinking at times, but it's all possible.
There's really nothing in that write up that takes special skills that I don't think the average breathing person can't handle. Maybe a tool or two to buy, but easy enough.
07-05-2011
I have muth mirrors they come with the car and they look sick
I dont know what I have under the hood but its tuned.
07-06-2011
^^^ pics?
Originally Posted by TLSheff
07-11-2011
yeah pics would be great! I ordered 6000k Headlights Saturday night! and I bought new housings from a buddy cause mine are all crapped up so I will post pics of those when I get them installed. I also did a white two tone on my dash and will post pictures of that also!
07-11-2011
it wont let me post them how else can i show them?
I dont know what I have under the hood but its tuned.
07-11-2011
put them in your garage photos maybe?
07-11-2011
How did you wire in the underglow in the hood? did you do it yourself? was it easy?
07-11-2011
I got the mirrors on my garage now and yea I did all the lighting my self its really eazy
I dont know what I have under the hood but its tuned.
07-11-2011
fyi, 97-0? ford windstar mirrors will fit on out cars. they come signaled, and can come signaled and heated.
04 Impala SS Indy:
07-11-2011
will start looking for them
Originally Posted by TLSheff
07-11-2011
sweet thanks! and would you be up for posting a tutorial on doing the underglow?
07-11-2011
the stuff under the hood is different then underglow, its better look at oznium.com its better and brighter
I dont know what I have under the hood but its tuned.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
