does anybody the GM part number for the carbon fiber special edition gauge cluster??? or how i can get one in KHM?????? any one have one for sale potentially????? reallly need this!!!!!!
|
does anybody the GM part number for the carbon fiber special edition gauge cluster??? or how i can get one in KHM?????? any one have one for sale potentially????? reallly need this!!!!!!
i got mine from ebay, just type in "white grand prix gauge face". i just bought the applique that replaces the standard face only. i think i payed $70 for it a few months back. then you wouldnt have to recalibrate your odometer.
try this:
99 00 01 02 PONTIAC GRAND PRIX WHITE CLUSTER GAUGE FACE | eBay
you will, however have to remove your needles and strip off your old gauge face then either recalibrate or take the time to put your needles back on exactly right. i took notes of exactly where the original location of the needles were during a short cruise (enough to get up to opperating temp) at 60mph out on the back country roads. at that point i returned home to remove the old and install the new face. there is foam on the back of the original face that has to be reused to prevent light dispursion, i used a razor to shave this off and just set it in the appropriate spots in the cluster housing. be sure to remove ALL of the adhesive from the clear plastic in the cluster.
...went out for another cruise at 60mph according to my HUD (i suppose a gps or smart phone would work too) while traveling @ 60mph, i reinstalled the tach and speedo needles EXACTLY where they were on the first try. WARNING: pay attention to the road. the fuel and temp needles were installed at idle
Last edited by triebenbach07; 08-12-2011 at 11:38 AM.
i suppose u could then use this over that to get it to metric
1998-2003 Pontiac Grand Prix METRIC KMH White Gauges | eBay
« Previous Thread | Next Thread » |
Tags for this Thread |