i like the look of the 600k but i must say i have 4300k in our sorento and it looks good and is really bright also the cops will give u less hassel the more blue u go the more u chance getting a ticket so check ur local laws
Printable View
i like the look of the 600k but i must say i have 4300k in our sorento and it looks good and is really bright also the cops will give u less hassel the more blue u go the more u chance getting a ticket so check ur local laws
600k? thats insane lol :p
yea im getting 6000k whenever theyre available
sorry ment 6000kQuote:
Originally Posted by 02gpgt88
i know... the kit still isnt available wtf?
INSTALL COMPLETE!!!! THANKS EVERYONE!!!
anyone know how to do the fog light install now????
I'm getting ready to upgrade my fogs. I'm still debating whether to keep the stock lamps and put in 880 HID bulbs, or upgrade to the Optilux or Pilot lamps that are commonly swapped in and put HID bulbs into them. I'm playing cheap right now, but I don't want to waste money either. Right no I'm leaning more towards the Pilot 203W, the Pilot 360C, or the Optilux 1300, and swap them to H3 HID bulbs.Quote:
Originally Posted by blortz
The weather has kept me from being able to plan any wrenching time on the car, so I'm waiting patiently for some dry weather before I make my final decision.
Get a glass lens fog light with hids and call it a day.
i still dont know how to do the fog light install it seems easy but the directions dont tell me what 2 of the wires do? it tuns through a groment and has a factory pigtail on it. the other end has 2 wires that run towards the bulb with 2 pin like things on the end ?? wjhere the hell do they go???? sooo confused1 HELP!
When you take out your old fog lights you will quickly understand how everything goes back together.
according to the diagram its connection 3 and connects to the ballast where there is a pigtail and then to the factory vehicle plug.. but there is no plug just the 2 pins so do i hard wire it or what????? or just run it to the battery eliminating a relay harness?????
and why do you need a glass lens?
You can stick the pins in the factory connector, You don't need glass, it would just help so you don't burn the stock plastic housings.
ohhhhh okay. which factory connector? the one that would connect to the bulb? orrr? will it flicker... some say if you buy a good quality one it doesnt... i have the same brand in my headlights i did a couple weeks ago without any problems...
The one that will connect to the bulb, might flicker some do some don't. Id get a relay harness for both sets of HIDs.
the install is complete..... do i really need a wire harness? how much benefit does it have?