okay i got 35w ballasts and 6k fog 880 bulbs..i was reading on another forum that maybe I would need the harness because it will blow the fuse, is this true or not
this is a 98 gp gt
thanks
Jeremy
|
|
11-29-2010
okay i got 35w ballasts and 6k fog 880 bulbs..i was reading on another forum that maybe I would need the harness because it will blow the fuse, is this true or not
this is a 98 gp gt
thanks
Jeremy
11-29-2010
Not true BUT every car is different. Although IF you have stock fog light housings they WILL melt over a period of time. If you have newer fog light assy's you will be ok.
11-29-2010
thanks Shawn I didnt know, if they melt they melt lol then I will buy some new assemblys. im just using the fogs as the brights
11-29-2010
I've had mine for a while and they haven't melted stock housings. They are 35W.
11-29-2010
Get a harness and be safe.. it's not expensive or hard to hook one up.
Most aftermarket assemblies are not 880 bulbs.
We have a 55w HID kit working on my brother GT on his fog light with a relay harness with no problems if that means anything to ya
BTW, don't use them for highs, flashing the ballast on and off will shorten the life of them.
11-29-2010
keep your stock ones, i made this mistake and got some glass ones from pilot automotive and they use a h3 bulb and they sucks, the light out put i think is terrible, i used to see everything with my stock lenses with hids now that i got the new ones i cant even see a person standing in front of my car with just my fogs.
Oh and also you might want to get a relay, i shorted out my fogs without a relay
11-30-2010
good looking out everyone.. Im running the 35 watt ballasts, I got a relay harness I made a year back I might use just to be safe... thanks everyone... oh how did everyone mount there ballasts for the fog set up
11-30-2010
Should be a black piece of metal running front to back down low there. I didn't want to take a ton of stuff off so I mounted them down there with mounting tape and ran a zip tie around them for safe measure.Originally Posted by stlunatics2oo3
11-30-2010
blazer brand projector fog lights use the 880 bulbs, have a great cutoff (easily outperform the stock headlights). The only problem with them os since they are so low you losse some of the distance that they could really help with
11-30-2010
I've was lazy, and mounted mine right under the headlight with some 3M double-sided tape, been doing fine. And that's with 2 ballasts on each side.
11-30-2010
lol Im lazy too I was thinking the headlight area wasnt to bad of an idea it wouldnt get to weathered being its up here in michigan. right now I got my headlight ballasts close to the grilles
11-30-2010
retrofit projectors in your fogs....or go home
12-05-2010
That's what I plan on doing, just trying to think of how I'm going to go about doing it. I'm currently working on headlights atm so it'll have to be after that.
11-30-2010
true.....now if only someone would do that.........
11-30-2010
I did.
11-30-2010
I'll take pics of my ballast location if I think about it, six total.
12-01-2010
any pics?
12-02-2010
i mounted my ballasts to the plastic piece that runs under neath for now, they work we shall see when the snow really flys but I doubt it will get that deep when I drive
12-02-2010
you wont have any problems with it there, but check your wiring after winter. Michigan winters destroy the wiring to hids. I always suggest to people to replace the wiring after each winter.
12-02-2010
thanks for the heads up.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
