H body tensioner + modded Belt Wrap kit + 8 Rib belt = overkill = awesomeness
that pretty much sums it up. Yes its over kill, yes i DONT need it for my street pulley, but at the track with a 2.7-2.8 it will be nice to know there is no slip problems
Remember the H body Tensioner is the opposite of the W body Tensioner, so I had to custom make some spacers, got them on the Mill and Lathe at work. They were fabricated out of some 1" OD alum round stock. The total Height is 3/4" to give the proper space required to......1. clear the tensioner 2. provide enough space for the wrap kit and the SC pulley to clear the belt.
and the Money shots
all in all this was a PITA, because i had to find the correct belt and this took alot of fabrication to make right. I do need to hand polish the Wrap kit yet, the spacers were polished after machining
