GTX hood screen size

[SnowDrift]

For anyone that has a GTX of a GTX hood with the screens in the openings, can someone give me the dimensions of the screen and the hole center dimensions? I would like to know before I cut the holes open on the hood that I have.

Also, are these available to buy through a recommended source?

[Zef_66]

For anyone that has a GTX of a GTX hood with the screens in the openings, can someone give me the dimensions of the screen and the hole center dimensions? I would like to know before I cut the holes open on the hood that I have.

Also, are these available to buy through a recommended source?

I went through the same thing. The answer I got was that they were only availble from SLP. What I did was take some cardboard and made some cardboard cutouts of that looked right in the openings. Then traced them onto expanded metal, and cut them out. They look fine and match my regular grills.

[SnowDrift]

Thank you. Does anyone have the dimensions on the screen itself?

[Zef_66]

Thank you. Does anyone have the dimensions on the screen itself?

My point was that the screens are hard to come up with exact dimensions. They are quite a mix of varying radii. I have a set at home, but I have no good way to measure them and provide any dimensions. It's not like they just a rectangle or all sharp corners. The entire grill is a bunch of radii all blended together. Very hard to measure.

[SnowDrift]

Could you give me the maximum height and length of the screen you have? What I'm trying to find out is if the screen will be too large for my hood or not. If it will be too large, then I won't plan on having screens at all and will cut the entire opening out. If it will fit, then I'll leave material on each side to allow for the mounting screw on each end.

[SnowDrift]

Got what I needed now.

This can be locked if the moderators would like to.