tinted headlights and turn signals

What do you use to buff bro? Somebody told me to wet sand them with 2000 grit after it's been cleared. Then take wax and buff them? How do you buff?

Quote:

---

Originally Posted by nawarkk

What do you use to buff bro? Somebody told me to wet sand them with 2000 grit after it's been cleared. Then take wax and buff them? How do you buff?

---

i use a 3M fine cut rubbing compound after wet sanding with 2000 grit, you can either buff them by hand or by machine, i would suggest using a dual action polisher so you don't burn the paint.. i use a porter cable 7424 polisher

Quote:

---

Originally Posted by r33na

the nightshades you all speak of i dont even know what that is..i sanded mine and mixed a metallic black and dumped it into some 931 (clear)..and sprayed them and baked them..honestly i didnt even know there was a different way to do it...considering yours came out really nice in comparison to most of what i have seen..:th_thumbsup-wink:

---

I know of someone who goes this route too...I personally like the black with clear and spraying them.

But for the OP, yours turned out pretty damn good!! Nice looking!

Quote:

---

Originally Posted by 97gpGTP

I personally like the black with clear and spraying them.

---

^^ Thats the OLD way now.. Theres better ways now to go tinted & have the same lighting you had with stock..TThey will look dark from far away be light when you are close..

Tails look nice by the way..