|
|
10-07-2009
can someone tell me what screws need taken out to remove the headlights corners and tailights. if you could...take pictures and circle the screws? im planning on restoring the headlights clearing the corners and tinting the tails this weekend but im clueless about what to unscrew to get em out
10-07-2009
For the headlights all you need to do is remove the two 10mm hex-head screws. The corner-light unscrews from the headlight via a philips-head screw.
The tail lights come out with the plastic screws in your trunk. It's simple for all of this, you won't need pics.
10-07-2009
To take out the headlights, remove the 2 bolts on top of each headlight then push the assembly away from the center of the car to pop the headlight out of the tab in the back and then slide it out. For the tails, theres two plastic nuts on each side. Twist those off then pull back the carpet to get at the 3rd nut and pull the assembly out.
P.S. sorry I don't have any pics but you should be able to figure it out no problem so I dont think youll need them
10-08-2009
pics are all over google
thats how i learned to take mine out
10-09-2009
There's two bolts for each set of headlights, I've yet to take the tails off but I'm sure it's the same idea. But if you still need pics I can get some tomorrow.
10-10-2009
thanks for the help everyone. no need for any pictures. i already cleared the headlights just need to figure out what to use to seal em back up lol
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
