Anyone know a good panel adhiesive for metal to metal??
i need more than just the small tube of jbweld, i need a larger ammount.
ideas?
|
Lots of companies make a 2 part "panel bond" adhesive that is actually used insetead of welding on in cooperativly with a few tacks. Its most commonly used to replace qtr pannel and roof skins.
LORD Fusor (brand)
SEM "panel bond"
google thoughs... you will have to but, online if you don't work in the industry and have acess from the vendors... try autobodytoolmart.com!
-KT
Thanks
actually on a whim i stoped at the auto body store where i got the panels and they have something,
after a small lecture about welding is better then glusing i got some crazy ass glue lol will take pics as i think today is the day the rockers go back on! (will update that thread later)
THANKS!
Ok so the stuff is called Pliogrip 7779 - i got the 10 min set time version just to give me more play time (was either 1min or 10, guy was out of the 3 min version)
this stuff is serious!!
i was about to install the rockers today when i read it needs a specific temp to work best, with impending rain i didnt wanna eff it up, so more then likely sat will be the day.. but the glue will work!
Just a heads up. After you place the parts together, you must SLIDE it into position. You musn't lift and replace the peice as it chemicly cures and the bond will be weakened. Though if it doese happen ohwell... inless its a structural part, I wouldn't sweat it.
« Previous Thread | Next Thread » |
Tags for this Thread |