What hids to go with???????????

im in the same boat, looking for HIDS that come with everything! and a somewhat easy installation.

We have them. You simply unplug your old bulbs plug your HID's in then plug the ballasts in and your done. They also come with a 1 year warranty. 80.00 plus shipping


Let me know TopDeadCenterRacing@cox.net

would i have to upgrade my fogs for hid?

Ballast connects right to the stock wiring harness? Thanks!!

Quote:

---

Originally Posted by riceburner

would i have to upgrade my fogs for hid?

---

probably. youd more than likely melt the stock plastic housings.

Quote:

---

Originally Posted by firstdue

Ballast connects right to the stock wiring harness? Thanks!!

---

you only do this if you want to destroy your HID bulbs really fast. the stock wiring isnt reliable. you need an upgraded harness to run them correctly.

Quote:

---

Originally Posted by riceburner

would i have to upgrade my fogs for hid?

---

Yes. It is highly recomended.

Quote:

---

Originally Posted by firstdue

Ballast connects right to the stock wiring harness? Thanks!!

---

Yes sir. It's about the easiest install there is.

hey TDC looking to do the same thing as IrishNation could you send me a pm of what i need i have an 04 though

Sure.

i sell h.i.d.s and i have 8k fogs and headlights in my car if intrested pm and ill explain itg more

stock housings will not survive the heat of HIDS and they will melt. Easiest route... buy Pilot Driving lights from Autozone, mount em, and order H3 HIDs for those housings...

Quote:

---

Originally Posted by Iron Indian

stock housings will not survive the heat of HIDS and they will melt. Easiest route... buy Pilot Driving lights from Autozone, mount em, and order H3 HIDs for those housings...

---

how much that set u back

i just took my old bulbs out and pluged my new hids in and as long as the bulb is not touching the plastic lens then it will not melt or burn anything. but if it is touching they will heat and melt them pretty fast

Quote:

---

Originally Posted by dmoney01

i just took my old bulbs out and pluged my new hids in and as long as the bulb is not touching the plastic lens then it will not melt or burn anything. but if it is touching they will heat and melt them pretty fast

---

Mine didn't touch either, they melted in 2 months (frequent night driving at that time too)...

Quote:

---

Originally Posted by GrandPrixGT00

how much that set u back

---

About $30 or $40... there so much nicer than stock pieces....

the thing is on my 04 the turn signals are with the fogs so what can i do about that

Quote:

---

Originally Posted by gpgt04

the thing is on my 04 the turn signals are with the fogs so what can i do about that

---

sounds like a custom job to me. figure something out.

Quote:

---

Originally Posted by TDCRacing

I'll shoot you something over either today or tomorrow. Sounds like I can meet all of your needs. The reason I did not know about the harness is because I just started selling this product. So i'm not to firmiliar with it yet.

---

what would you want for a kit for the 8000k. and do you have ones for the fog lights?

All the kit's are 80.00 plus 9.95 shipping. No matter what they are or what Kelvin rating they are.

i have aftermarket headlights. i know this might sound dumb (im still learning bear with me) the halo projector headlights, is it ok to use the HIDS or will they melt them ive had people tell me they will melt my headlights