Thread: Looking to turbo

well im just looking to be able to hit low 13's thats all i want also about the injectors that i have right now are the 42.5 do you think this injectors will be good with 10lb boost ?? maybe 8lb ?? right now i have everything already install manifolds/injectors/LT1 MAF/oil lines/intercooler/Wbody custome PCM/ i just need tofind the right turbo i understand ebay turbos are not good but would one of this be able to last for at least 6 months while i try to get more money for a good turbo ??

boost doesnt tell you flow.

MAF freq or HP numbers or IDC will tell you how well your injectors are doing.

IDC is the easiest way considering there is no math involved.

But from a dyno you can calculate it.

Short answer? Probably.

oh ok well im going to dyno turn the car after i find the right turbo il check that any advice in what turbo should i get thats is not soo expensive ?? or do you know if there someone that is selling a used turbo here in the forum
?

its this turbo good for right now ? link.....HX40 SUPER DRAG DIESEL TURBO CHARGER H40X NEW @@ on eBay!

bullseye S256 is decent, as is a precision P61.

But a T67 seems to be the more common choice for bigger builds.

T72 is more "balls to the wall"

Note: no turbo costs $300....

$800+ unless you're buying used.... and that can be a nightmare.

thanks thats a big help i will try to get one of those ...whitch one is less expensive ? do you if someone is selling one of this ?? will replicas work ? for 6 months ? is godspeed an ok brand ?

name brand only...

If not, you might nuke your motor.

Its not worth it in the long run.

if its real.

sure.

if its a fake.

no.

simple no?

yes holset and whitch one of all this can i get cheaper ? if any one is selling a used one please contact me !

i really need to get a turbo my car has been in the garage for almost a month already and i need the car but i dont have $800 right now only $400 thats why i was trying to get an ebay turbo for right now while i was trying to get a good one but i guess its not worth it i will need to wait another month to get the money ..

i guess i will need to do that thanks and this is my car by the way link///http://www.cardomain.com/ride/3893101/2005-pontiac-grand-prix-sedan-4d

http://www.cardomain.com/ride/389310...-prix-sedan-4d

i dont knwo that the part number but they are 20in and they are build by vct

i dont need that much power im just looking to hit low 13's thats all i want at this moment i just need a turbocharger that will get me to this goal !also i was looking at the hx40 and hx50 and they have internal wastegatesn and they are set to 20 psi for cumming turbo trucks can i change the psi to a lower pressure ?

here are some of the picture that i took before replace the LT1 MAF and before taking this turbo out and started looking for a bigger turbo
http://www.cardomain.com/ride/389310...edan-4d/page-5