Triple Edge Performance

[Trannyman95]

As some of you know Triple Edge Performance is the business name I work under. We are currently running a special on our 4T65E high performance street transmissions at a very low price of $1250 until the end of 2007. After this the price will go back up to $1500 which is the normal price. The website with more info is Homepage and also parts for the 4T65E and general info. This special is coming to a quick end so take advantage of it while you can! We also do a complete array of work on 3800 powered cars and custom engine swaps.

[8sec-z]

Hi Dave!
I can attest to Trannyman95, Dave's, knowledge.
Dave knows what he is talking about. He can build anyone a hardcore transmission for a lot less than the competitors. He just fixed my car-new axles and a few odds and ends. Additionally, he can tune your car with hptuners software. (I couldn't get mine tuned this week due to the wet/snowy weather). He also knows way too much about the L67 setup. I am glad I met him and I know have a reliable trustworthy L67 mechanic less than an hour away. Check out his website and view customers pictures and check out come cool L67 swaps. If you have questions about his work and think you need to talk to a previous reference of his work, then PM me. I am and will be one his satisfied customers. Now, what's the wait for a ported blower, LIM and northstar TB??!!

[IndeedSS]

A+ for Dave. Most of the items in my signature he has had his hands on.

[GR8racingfool]

I send people his way for porting/polishing of the M90's. TOP notch service and quality. Plus hes fun to hang with at the BGPM.

~F~

[Iron Indian]

A++++ Vendor! I have one of his kick ass Ported S/Cs! Very good guy to talk with too....

[IndeedSS]

His porting looks better than any I've seen. It's a shame once installed you can't appreciate the quality or beauty.

[YoungGTP]

how much is it for him to port and polish the s/c? cause i am talking everyones word that he does a top notch job

[Trannyman95]

Below is my current pricing on blower housing porting

Standard outlet porting $150
IC sized outlet porting $170
Inlet porting for stock size inlet +$50
Inlet opened to 75.5mm and blended/ported +$75
Core fee if you dont send me your housing first $75
Shipping UPS ground to US $20

Turnaround time is typically 1-2 weeks

[Sabrewings]

What about LIM and TB porting pricing?

[Trannyman95]

I charge $75 to gasket match the runners and $75 to mill the top side to match an IC.
For throttle bodies it all depends what you have but I havent aquired larger throttle plates yet and honestly ZZP has that covered if you want larger than stock at pretty reasonable prices IMO but I do port and blend stock sized throttle bodies for $100.

[justwhisen]

Ok porting is one thing that I havent tried and dont really want to.
lets say I want a ported s/c with LIM and TB from the N* with a new snout.
out right. I would send core stuff back (DD for now). what is the damage?
and could you help me tune over phone.

P.S. would I need other mods to support this stuff?

[Sabrewings]

I charge $75 to gasket match the runners and $75 to mill the top side to match an IC.

Would you port the inlet to match your blower outlet porting? Or is it pretty much the same? An IC will be in my future, but probably not at first.

For throttle bodies it all depends what you have but I havent aquired larger throttle plates yet and honestly ZZP has that covered if you want larger than stock at pretty reasonable prices IMO but I do port and blend stock sized throttle bodies for $100.

I've seen your work on TBs from other L67 owners and it's top notch. But the only pricing I got from them was for used. Your prices are very satisfactory to me.

[justwhisen]

ok scratch the TB part of my question.

[YoungGTP]

im buyin a completly ported sc, N* tb, and LQ4 maf, what do i need to support it. (insead of headers i was gonna get a plog from zzp)

[Trannyman95]

You can use a ported blower and larger tb on a bone stock engine if you want. Those are mods that compliment airflow and efficiency of the supercharger and will compliment all other engine mods just fine no matter which route you go.

[justwhisen]

cool. I actually plan on opening the exhaust a little. just trying to find my direction before I spend any money.

[Sabrewings]

I appreciate the answers thus far, Trannyman. A couple more questions.

How much do you charge for LIM and TB cores?

[Trannyman95]

$50 each on the cores for LIM and L67 TB

[Sabrewings]

Excellent! Thanks!

[Quicklynx]

As some of you know Triple Edge Performance is the business name I work under. We are currently running a special on our 4T65E high performance street transmissions at a very low price of $1250 until the end of 2007. After this the price will go back up to $1500 which is the normal price. The website with more info is Homepage and also parts for the 4T65E and general info. This special is coming to a quick end so take advantage of it while you can! We also do a complete array of work on 3800 powered cars and custom engine swaps.

Will you be having a sale again on the high performance street transmissions anytime soon/ever again? Thanks