Thread: First time at the track 13.2 @ 104 Vid

So I decided to take a trip to Milan Dragway for a little test and tune. I ran with the 3.3 pulley and a pathetic pair of all seasons that I prayed would not blow during a pass. Track prep was a little crappy as told to me by some of the guys who go there regularly, so obviously traction was an issue.

I decided not to pulley down since I could barely hook up anyway, but I did manage a 13.2 with only 5 passes. My first pass was a 15.1 (spun like hell) then I ran a 14.0 then a 13.6- A 13.2 and a 13.8. Very inconsistent, but maybe I will see 12's next time with some better tires.

Mods were : 3.3 MPS, Comp VS cam, 90# valve springs, TEP Trans with 3.29's, 4 inch intake w/ K&N, Poly front mounts, SSAC headers, 180tstat, 103's

YouTube - Grand Prix 1/4 mile race

same time as me

what kind of tune do you have?

Originally Posted by 99prixgt

what kind of tune do you have?

A cal I got from big worm. I think it's similar to a zzp 1.0

GJ! I'd like to get my hands on a cam again...

Originally Posted by darkhorizon

What day did you go, i was there all day Saturday.

I went Sunday. I'm planning on this coming Sunday also

60ft's and 1/8th's?

Originally Posted by 01gpgt01

60ft's and 1/8th's?

60 ft was 1.9933
1/8 ET 8.5701
1/8 Trap 83.53

pretty decent 60 for all seasons. Track prep must have been decent

Originally Posted by 01gpgt01

pretty decent 60 for all seasons. Track prep must have been decent

Track prep sucked! I got lucky and lined up in some warm rubber tracks from the guy before me.

That's the trick...root that F8cker in front of ya. I pulled 1.8 and 1.9 60's on stock Bridgestones that way to pull out 13's on 1.84 Rockers, PEM's, 3" DP, Intake...blahblahblah

i dont wanna run at the track yet, i got cracked summer tires with 18inch rims LOL.
not to mention i dont want my tranny to go booom.
guess il have to wait a while
I wanna know what i run in the 1/4 mile.
but i still wanna do a VS cam (most likely) and headers (SD ones probably)

Originally Posted by GrandPrixGTP1

i dont wanna run at the track yet, i got cracked summer tires with 18inch rims LOL.
not to mention i dont want my tranny to go booom.
guess il have to wait a while
I wanna know what i run in the 1/4 mile.
but i still wanna do a VS cam (most likely) and headers (SD ones probably)

The Vs cam is the perfect cam for someone who is not planning to mod beyond Streetability. Yeah the XP and s1x cams are monsters on the highway, but the VS cam has the same potential in the 1/4 mile. Go for it!

Originally Posted by bluegtp91

That's the trick...root that F8cker in front of ya. I pulled 1.8 and 1.9 60's on stock Bridgestones that way to pull out 13's on 1.84 Rockers, PEM's, 3" DP, Intake...blahblahblah

Hell yeah! That's exactly what I was doing. I saw as bad as 2.2-2.3 60's until I started to find where the rubber spots were.

That's how i hit my 14.1 was following a guy with slicks.

Nice run! I'm going to have to start lining up behind a fast car to get my 60' down

if were running you need to get a lil bit faster

props on getting a video!

also Milan this time of year your a crazy motha ****a....but none the less makes me want to go get mine out of the barn

Originally Posted by bballa0740

if were running you need to get a lil bit faster

props on getting a video!

also Milan this time of year your a crazy motha ****a....but none the less makes me want to go get mine out of the barn

Thanks bro. I ain't racing you until I get an intercooler on this thing! Or maybe when I e85 it. but you'd smoke me hands down right now (even if I ran DR's) I've seen those vids. Your car has Chuck Norris nuts (especially for no cam)

cam e85 and gen v is next on the agenda just needto sell other car and pay some **** off first