how bad would a 05 350z beat my 98 gtp

a 6-speed Z with a competant driver should pull on a lightly modded GTP. While we lack top end, they have pull throughout the entire powerband

Here's me and my friend's Comp-G racing an SE-R Altima 6-speed with a Nismo intake and TB spacer. Comp-G had intake, plog, ported mani, 3.5 pulley, tune, catless dp and a few other odd parts. Mine at the time was still pretty much stock minus some minor exhaust work, intake, and a can tune
He pulled on us both. Dude can drive though.
YouTube - 04 Comp-G vs. 05 Altima SE-R
(p.s. I let off at 100 on the last run cause my trans was ****ED)


Second time around my car was down haha. But Comp-G had same mods as above with a few other things I can't remember and SE-R had added a VIS blockplate (removes a butterfly valve in the intake manifold to help air flow up top)

http://www.youtube.com/watch?v=8bFZvZdTEl8

driver mod is always better than any type of power mods.

Quote:

---

Originally Posted by Bio248

driver mod is always better than any type of power mods.

---

x2 on that one haha.

VQ is a potent engine mated with a 6-speed. However without a good driver it's not even worth the gas racing 'em

dont worry, my next car is possibly a G35. LOVE THEM!

Hell yeah man! Better yet, G37 :)

Quote:

---

Originally Posted by ninnyGTP

Hell yeah man! Better yet, G37 :)

---

i can only get a G37 in coupe and AWD...why not? WHEEEEEEE!

I sense alot of E-Penis showing off in this thread.

Quote:

---

Originally Posted by Boostd1

I sense alot of E-Penis showing off in this thread.

---

Hey Marc, did I ever tell you how SLOW your car is. L32 is FAIL compared to a topswap haha

Don't make fun of me cause I'm different :(

Although you may poke fun at the fact that my Topswap blew up at the track

See! That trans bolt was holding you back hahaha. Then again, I blew my trans racing a 240 BEFORE the SR20

Nah, I just ran the 2.8 pulley on ultra high compression with no supporting mods, 45* timing advance WOT and unplugged the knock sensors with 3 injectors unplugged.

:th_scratchhead:

Well, could be worse.. Could be running E85 on stock GTP AFR's and blow the motor racing you on said topswap

Quote:

---

Originally Posted by ninnyGTP

Well, could be worse.. Could be running E85 on stock GTP AFR's and blow the motor racing you on said topswap

---

Do it!

I should! Stock injectors and fuel pump will do fine! haha

i like boost. i like timing. i like octane.

...i wish i would have finished my e85/meth setup and ran it. car would have been a MONSTER!

Well GTP's are on the cheap, no time like the present to start again

Quote:

---

Originally Posted by Bio248

i like boost. i like timing. i like octane.

...i wish i would have finished my e85/meth setup and ran it. car would have been a MONSTER!

---

Yeah. I dropped 4 pulley sizes and increased timing 8* with nothing else but E85 (injectors/FP, etc) and still had no knock (on high compression nonetheless)

E85 = Win

Quote:

---

Originally Posted by Boostd1

Yeah. I dropped 4 pulley sizes and increased timing 8* with nothing else but E85 (injectors/FP, etc) and still had no knock (on high compression nonetheless)

E85 = Win

---

thats what im talkin' about!

Yeah dude! I was impressed :th_biggrin2:

Quote:

---

Originally Posted by ninnyGTP

a 6-speed Z with a competant driver should pull on a lightly modded GTP. While we lack top end, they have pull throughout the entire powerband

Here's me and my friend's Comp-G racing an SE-R Altima 6-speed with a Nismo intake and TB spacer. Comp-G had intake, plog, ported mani, 3.5 pulley, tune, catless dp and a few other odd parts. Mine at the time was still pretty much stock minus some minor exhaust work, intake, and a can tune
He pulled on us both. Dude can drive though.
YouTube - 04 Comp-G vs. 05 Altima SE-R
(p.s. I let off at 100 on the last run cause my trans was ****ED)


Second time around my car was down haha. But Comp-G had same mods as above with a few other things I can't remember and SE-R had added a VIS blockplate (removes a butterfly valve in the intake manifold to help air flow up top)

YouTube - 05 SE-R vs. 04 Comp-G [take 2]

---

sir your friends comp-g gotta be knockin like a biachhh the video says hes runnin a 3.3 pully with plogs and dp? ouchhh and on the e85 talk.. i would loveeee to get onto that bandwagon... but its not that frequest in NE ohio yet... :th_thumb-down: