Up coming races what do you think ?

**ryangtp89** · 03-14-2009

A friend of a friend has an 08 subaru wrx with just a intake and exhust, I belive the 08's have 260 sumthing hp and 244 ft. lbs. trq. He wants to go from a dig and i said sure i already know the out come from that is, soo after we go from a dig it's my choice on the next go so whats the best roll i should go for 40mph ? Also a friend of a friend has an 02 mustang gt automatice with a superchip and mufflers lol he thinks hes badass. So whats is the l67 best at for a roll ? 30, 40, 50 ??

**dmoney01** · 03-14-2009

i do 15 or 25 or 35

**dagger** · 03-14-2009

yeah 20-25 would work pretty well.

**dmoney01** · 03-14-2009

ryan do you or have you had an problems with your zzp pcm?

**blueguy** · 03-15-2009

Originally Posted by dmoney01

ryan do you or have you had an problems with your zzp pcm?

Just wondering if you are still considering getting a ZZP PCM...just get a DHP for the extra 10 bucks and your car will be WAY safer.

**dmoney01** · 03-15-2009

Originally Posted by bluegtp91

Just wondering if you are still considering getting a ZZP PCM...just get a DHP for the extra 10 bucks and your car will be WAY safer.

what is a DHP and were could i find it at?

**BwolfGT** · 03-15-2009

Originally Posted by dmoney01

what is a DHP and were could i find it at?

Digital Horsepower, you can check em out on here; Digital Horsepower, Inc : The Programmed Replacement for Displacement

**blueguy** · 03-15-2009

If you have stock 2.93 gears then I would go from a 40 roll...if you have the 3.29's I say a 30 ish run would do ya...

I'd say get a custom tune and port the supercharger...then you would LOVE your car lol IMO, I don't like the ZZP tunes, I'd say pick up a DHP...if you were around here we have the files for em and just swap em in for ya lol

Might even be able to drop to a 3.3" or 3.25" if you had rockers...OR a 3.2" for sure with a VS cam or something

**ryangtp89** · 03-15-2009

I have the stock gears in my triple edge performance tranny. Now i bought the zzp pcm a year ago and it was my very first mod, I don't have any problems with it but i would like to send the pcm over to tdc and get it tuned after i get some 1.9 mod rockers put in it. I wish i was around your area bluegtp91 i would defently take up on that offer. After i do get the rockers i will be getting the s/c ported but money is tight right now.

**blueguy** · 03-15-2009

Originally Posted by ryangtp89

I have the stock gears in my triple edge performance tranny. Now i bought the zzp pcm a year ago and it was my very first mod, I don't have any problems with it but i would like to send the pcm over to tdc and get it tuned after i get some 1.9 mod rockers put in it. I wish i was around your area bluegtp91 i would defently take up on that offer. After i do get the rockers i will be getting the s/c ported but money is tight right now.

Well one thing is for sure...dont waste your money on a ZZP ported case or elsewhere...have Green Bastard Products do it...WAY cheaper and a lot better...I've had LOTS of work done for my car and LOVE IT

**dmoney01** · 03-15-2009

does anyone have one of these?

**blueguy** · 03-15-2009

Originally Posted by dmoney01

does anyone have one of these?

Ummm...lots of people.

**dmoney01** · 03-15-2009

oh cause i have never heard of it and am looking to buy one very very soon, like right now and i can find were to buy this one is, it just tells you about it and thats it, i was going to buy one from intense