2 questions

[Xanthous]

The Dodge Challenger wheels I bought (18x7 24mm offset) rub the caliper. What are my options?

If I bought 04 Acura TL wheels (17x8 114.3 45mm offset) they should work correct?

[REDCRAPGP]

Run a small 5mm spacer

[Xanthous]

That's what I was thinking but if it was rubbing by a quarter inch like I was told, I would need a 10mm spacer? and then my wheels would poke farther.. wondering if that would contribute to more rub since the wheels are already +24mm. The other option i assume is to grind some of the caliper.

[smoke14]

I think you need wheels with at least a +35 offset. FWD cars tend to have a higher offset then a RWD car. The Acura wheels should fit better.
http://www.tirerack.com/wheels/tech/....jsp?techid=95

[stealthee]

Offset is only one part of the equation. Spoke design is another issue.

[smoke14]

Did you read the link I posted? also, "spoke design" (clearance) is part of the "offset".

[stealthee]

Spoke design is not part of the offset. Been there and done that.

[Xanthous]

I think it'll be a trial and error thing with the challenger wheels. As far as the acura wheels, i don't have to worry about the centerbore? bc i believe nissan wheels have issues with that.

[stealthee]

Looks like Honda/Acura has a 64.1mm center bore.

Nissans, such as the 350Z look to have a 66.1mm center bore.

Grand Prix has a 70.3mm center bore so fitment will be an issue there.

[Scottydoggs]

i used this site to find wheels that would fit. enter the cars wheels yo ulike and it shows the lug pattern and bore size for the hub. we need a 70.3

http://www.roadkillcustoms.com/hot-r...udSpreadMM=115

[stealthee]

Just remember if using that site that Scotty posted that we can also use 5 x 114.3, but I assume you know that since you are talking about the TL wheels.

[Xanthous]

What is the offset on the 18x7 07-08 grand prix gxp wheels?