Wheel studs wrong size

[Tim15401]

Ok I have a 99 gtp. Yesterday my lugs broke. I went to autozone to get new ones. They had 2 different size. They are both to small. The diamenater of tje hub and the old lugs r bigger then what they give me...... Any ideas

[dsmuts]

take a lugnut in there and tell them you need the one that fits that one.

[Tim15401]

The lugs r the same. Its the part that goes in the hub thats to small

[Tim15401]

The teeth part that locks the stud for moving

[dsmuts]

pull the wheel bearing off and take it in.

[Tim15401]

Yeah, thats what I thought but its like 20 degrees n 8ins of snow. Didnt want to do all of that

[dsmuts]

You could knock out what's left of the stud and take it in.

[matt5112]

Get a dealer stud.

They should have plenty of them. Priced under $10, yellow coating on it.

Papco parts never seem to actually work.

[Tim15401]

I got one stud out its bent. But they still couldnt match it up

[Tim15401]

The,size it calls for is m12/1.50 right if so mines bigger then that

[Tim15401]

Well guys heres some info for you. If your hubs where every replaced. The lug studs it calls for will NOT work. They have to be bigger. Part no. 610-476