if you bent the rotor....thats kinda hard to do, the rim would also be bent to sh1t. aka smashed!
if its bent, rotating could make a difference, i'd have it balanced to make sure its not bent sooner or later tho.
|
|
08-28-2012
if you bent the rotor....thats kinda hard to do, the rim would also be bent to sh1t. aka smashed!
if its bent, rotating could make a difference, i'd have it balanced to make sure its not bent sooner or later tho.
08-28-2012
Rotated. Feel a whole lot different than it was before.
A tie rod end though? Couldn't I tell that by looking at it?
I mean the car still drives straight.
08-28-2012
jack up a front tire, leave the wheel tight, grab the tire at the 3 o clock position, push and pull, you have almost no play, if a tie rod is bad you will feel it move, maybe even feel a click. do this for both sides.
08-28-2012
Inner tie rod could be bent throwing alignment off.
08-29-2012
Kolton.. fwiw after you confirmed my suspicion, the below is how I translate what you wrote:
"Hi.. I hit something hard and then wonder why my car seems to drive straight, but my tires are shredding off and squealing."
Maybe I've been playing with cars too long. But this sure seems like it's obviously going to effect the way the car drives.
08-29-2012
You're right... doesn't make sense... but really it makes noise. But still rides straightOriginally Posted by BillBoost37
08-29-2012
Seems to ride straight. likely it's pretty far out of whack. I'd suggest an alignment.
08-29-2012
If you hit a curb i can almost 100% guarantee you need an alignment.
Originally Posted by BillBoost37
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
