It's not a 98 PCM. It would not even read the file till he updated the software, but reads fine on his car. So we put a stock tune on then tweaked it a bit with zzp base file. We did full writes any time something was changed. We changed the TPS and did not make a difference. I think it is just relearning the shift. What we are worried most about is the knock now. After doing a run we noticed the TP% was not matching up with the MAF frequencies. At like 61% throttle it was at around 9400hz. When on his car 9400hz is 91% TP. And seeing how the files are to big to post I can't post them here. F***!!!!!
