Which gauge pods are you using?

[Gasnmyveins]

Thanks for the pic. That helps a lot. It's easy to think you know how something will look, but you just don't know until you actually see one. I think I'm probably going to get that one.
I'm still not sure how it attaches, though.

[redlinepontiac]

theres a tab that slides between the a piller and side of the dash, sounds chincy? yea it is it moves during semi spirted driving, but it serves its purpose.

hmm mat have you seen aftermarckets huds with a piece of tape that goes on the windsheild and a mini projector?

[twol8uluz]

I just ordered the zzp pillar pod. I plan on getting the aeroforce, but im not sure on what other gauges to get. Any ideas?

[DanPrixGTP]

Boost

[z3r0]

wideband

[z3r0]

yay matt liked my post
but it's def the next gauge i get

[twol8uluz]

So aeroforce, boost, and a wideband and ill have safe, reliable racekar!!!? Lmao

[Gasnmyveins]

theres a tab that slides between the a piller and side of the dash, sounds chincy? yea it is it moves during semi spirted driving, but it serves its purpose.

hmm mat have you seen aftermarckets huds with a piece of tape that goes on the windsheild and a mini projector?

Is there any way to use some two sided tape to hold the hud pod in place? Maybe put a strip of it along the inside edge, fold it up on the inside, then put it on the dash and use a long thin probe of some sort to reach in the side between the pod and the dash to push the tape down and get it to stick. I don't know if that would work, but if no one else tries it before I get mine, I will.

[Wotgtp]

Aeroforce and boost are what I have now. I have the wideband waiting to be installed.

[brandonl2000]

What? My HUD pod doesn't move at all. It stays in on its own just fine with the little tab in the pillar.

And Cam, you have the glowshift oil gauge too...is yours noisy as hell? When the needle sweeps on mine its so noisy.

[Fivefingerdeathpunch]

mine dont make any noise.

[brandonl2000]

Hmm. it's like the little motor in mine you can hear it when it moves the needle around

[DanPrixGTP]

I have the narrowband A/F gauge from glowshift (dont know why i bought it). worst piece of s**t in the world. it just bounces all over the place and its noisy. im going to replace it with the aeroforce sometime