Short Shifter [*]

[TLSheff]

this may sound dum nvm it will sound dum but how do you get the knob off?

Yup...kinda dum

From the link... in the directions...
"Step 3. Shift down to 1st and use the flathead to remove the retainer at the base of the shift knob. Pull the knob straight off, removing the shift boot and base with it. There is a bulb in the base that needs to be disconnected. Separate the knob from the boot. It just pulls free."

Just sayin

[industrialfish]

I did this to my Fiero years ago because the aftermarket cd player wouldn't eject if I was in park because of the shifter height.

You can use a shift knob for a manual shifter too if you put a piece of copper pipe inside the knob to fill up the difference. This way you also have no button to push, you either lock the knob down on the shaft to bypass the button, or leave it floating so you push down on the knob to press the yellow plastic piece.