Starting Hptuners

[gtpsleeper]

I did that too... I had to add the maf hz back to the primary and it worked. I then saved the entire config so I can just load it anytime I need and never set it up.

can you gimmie a process please? not a big computer guy here...

[TheOtherNick]

pm me your email and I can just send you my config.

[04silvercompg]

i found this to be super informative. i wasnt getting nowhere reading forums and all that b.s. im a hands on learner and this is pretty much that. thanks alot for the time invested!

[gtpsleeper]

use this method guys.... new tuner here and i got my car tuned in one day doin this....

20* of timing on a 3.0 car with a stock cam aint bad! thanks Nick!

[Explicit_Spade]

ProTip: You can't tune with a vac leak.

[TheOtherNick]

Thanks. Glad I helped ya.

[gtpsleeper]

ProTip: You can't tune with a vac leak.

well you could... wouldn make since to though...

[matt5112]

I dont approve of removing torque management since that helps your car shift.

But sticky worthy for sure.

[TheOtherNick]

My car was fine with no tq management until the 3.2 gen v

[matt5112]

your car can't shift to save its own life.

[TheOtherNick]

Thats why I said untill I prematurely hit post. Had to edit.

[matt5112]

In otherwords... torque mangement needs to be reworked... not removed........

[TheOtherNick]

Removed is fine, if you have a good trans. Maybe dave can chime in some time with what he likes to do.

[neel2008]

hmm my car has 220k on it and trans was rebuilt around 60k if i remember right, so sounds like torque management is staying on on my car for a while....lol

[Kejross]

Can we just take it off for performance shift somehow? I'm not near my car to get the laptop or I'd check.

[TheOtherNick]

Updated with a help link.

For tq mang if you disabled it would only really make a diff for normal driving when you are not one it.

[06grandprix93]

What would be different about this process on an N/A car?

[Swiggles]

My car was fine with no tq management until the 3.2 gen v

im a genV on a 3.2, should i not get rid of TM? i left torque reduction alone.

also when you say "Zero out" on the timing table, do mean to go with the stock table or make all the numbers in it "0"?

[TheOtherNick]

If your car wont shift WOT then you need tq mangament in the shifts, what timing table are you asking about? I zero out the temp modifiers so that it is just what I command it all the time.

[Swiggles]

ok, those are the tables i was talking about. i get it now.