Heads for top swap??

[apierce1289]

I was looking around for heads for my top swap and I found some off a buik part #411783 will those heads work on my 02 grand prix?

[matt5112]

do they have injector bungs in them?

[apierce1289]

Idk here's the eBay page: GM BUICK 3.8 SC L67 SUPERCHARGED CYLINDER HEAD | eBay

[matt5112]

You should be good.

Gonna have someone port 'em?

http://www.3800pro.com/forum/cams-he...-cracking.html

[apierce1289]

It says injectors screw in they still good? Please give some second opinions before I buy if someone else will look at the link?

[boostedcompg]

Unless I'm mistaken that's only one head......

[apierce1289]

It says to put the amount as 2 to get them as a set. Now does anyone know if these will work for sure?

[matt5112]

well until you have a machine shop you trust look at them...

you can't be 100%

[apierce1289]

So where's the best place to get beatup heads to port and polished and made like new And I already look at junk yard's no luck

[matt5112]

Those are probably a good bet if the seller is reliable.

[apierce1289]

Is there anyway to reference the part number to see if there exact match?

[matt5112]

I'm not sure, according to the link I found those part numbers don't mean anything.

[GeosGP]

Where are you located? I have a set of L67 heads in my garage. And an L36 engine, for that matter...

[apierce1289]

Im in NH on the east coast, just looking for a good deal

[GeosGP]

Well, the ones I have... one has a single bent valve but are fine other than that. If you are going to have them ported and polished you'd probably want to swap out to stainless steel valves anyways. $80 shipped for the pair if you want them.

[apierce1289]

Well, the ones I have... one has a single bent valve but are fine other than that. If you are going to have them ported and polished you'd probably want to swap out to stainless steel valves anyways. $80 shipped for the pair if you want them.

Ok do you take PayPal? Pm me for figuring out the rest