I figured I would add one more post here.
My plan is to hopefully get a junkyard harness cheap. The harness will have to be intact to do what I want. The plan is to pull the 14 pin connector and accompanying wires all the way to the pins in the connector. I want to try this route vs running the wires so that it all stays factory. I will use loom and tape to really go for that factory look.
At the end of the day it will be a learning experience lol! I have messed with wiring before but not on this level. Although its pretty basic, I've never tried to build into a harness like this. It should be fun!
