all you have to do with the crutchfield plate is take off the plastic protrusion and the receiver will sit flush. you have to cut out a piece of the subframe or whatever directly behind the receiver's location so the receiver can sit that far back.
|
|
11-07-2010
all you have to do with the crutchfield plate is take off the plastic protrusion and the receiver will sit flush. you have to cut out a piece of the subframe or whatever directly behind the receiver's location so the receiver can sit that far back.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
