Quote Originally Posted by BwolfGT View Post
Thanks, that's what I was thinkin.
Picked up some AL 104's, and an FWI, where's a good place to get the wires/fuel filter from?
Putting it all in this weekend hopefully
Fuel filter...just from your local auto parts store...if you don't have a T-Stat put in a 180* non-drilled...you can get those for like a few bucks at the auto store too...

Wires...depends...if you want to get stockers they run about 30-40 bucks...but MSD's are about 50-60, ZZP's are 80-90, and PRJ's (best wire IMO) are about 120 for a set...but are 10.4mm WIRES

Might try pulling of the coil packs and cleaning those too