Ok so here is a little background. Wheel hubs went bad, abs and trac lights started coming on. Replaced the hubs, and my friend broke the wire for the wheel speed sensor going into the hub. Drove without it for 6 or so months. Finally got a new hub, and still a dtc. Figured the pigtail was corroded. Replaced the pigtail from the wire harness going to the wheel hub wire. Still has the dtc.
So I started really looking into the code and am a bit unsure as to what to do or what the prblem is. I know the code is for the drivetrain detecting a bad voltage from the traction control unit or something of the sort but I'm really as a loss. Should I break out a meter to see where there is a voltage drop? What are the likely problems or what probably need to be replaced? Also, is it possible to just delete the code so the abs and tcs off lights justgo away? I don't use either of them anyway obviously. Thanks in advance!
