Indentify connector help

[azairhead63]

http://i115.photobucket.com/albums/n298/azairhead63/Mobile%20Uploads/20160811_070243.jpg

[Scottydoggs]

bad link. if you just found it laying there, its a spare unused plug. carry on.

[azairhead63]

No pack rat chewed it engine still runs will try agaim with link

[Scottydoggs]

damn rats lol

when i got my car it had rat poison zip tied all over the engine lol

[Fivefingerdeathpunch]

Click the direct link to the picture and post it here. Find the picture on PB, and off tthe right are links you can share and copy/paste here.

[azairhead63]

[Fivefingerdeathpunch]

I couldn't tell you exactly what the connector is called with a wire diagram but that's one of the main harness connectors for the top of the engine. Likely has the cam/crank wires, injectors wires, ICM wires.

[Scottydoggs]

that looks like the plug to the temp sensor harness. not sure what you call the harness side of that plug.

[azairhead63]

[azairhead63]

[Javi]

PT444 or 12117271

[Scottydoggs]

oh its the snout side, thats to the crank and cam harness. the other side leads past the coils to the front cover right?

[azairhead63]

[Scottydoggs]

any mods going on in there? nice light car, should fly.


and thats still the main harness side of the crank and cam sensor harness plug you need. im shocked it still runs wells like that. a lot of pcm info flows through that harness.

[azairhead63]

Its a purple wire cut thru

[azairhead63]

Purple with white stripe looks like fuel control but how can it still run >
?

[Scottydoggs]

that harness ties the icm and crank and cam sensor. and some thing to do with fuel together. time to hit a junk yard and lop one off any 3800 powered car you find.

[azairhead63]

Fuel injector signal to ecm really weird it run but havent actually driven it just idle and revving it up dont want to get stranded somewhwere test theory