Thread: brake bleeding question

Results 1 to 20 of 29

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1 Re: brake bleeding question 
    Donating Users EHB's Avatar
    Join Date
    Dec 2014
    Location
    Maryland
    Posts
    843
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    Quote Originally Posted by Sven The Sexman View Post
    This might seem like a dumb question, but were the brake bleeders facing up on those front calipers? I've seen too many with the bleeder facing south cause this issue. Otherwise, get a second person to start the car and push the brakes. Watch the fluid level in the master cylinder. If the level rises when the brakes are pressed, then guaranteed failed master cylinder. As for the cooling system, there's a bleeder on top of the thermostat housing to bleed air...you can try using that. Or you can remove the thermostat housing and fill coolant the rest of the way through there...that'll eliminate the majority of it in the engine. Remove heater hose from alternator bracket and "beer bong" it with coolant to eliminate air in the heater core.
    yes the caliper bleeders are up. and yes we used the bleeder for the coolant. haven't tried the methods your suggesting but i certainly will once we can start it again. thanks for the suggestion wicked and goat. much appreciated. this car is REALLY starting to frustrate me. never thought i'd be sinking this much into just to get it through inspection. i knew it had a few issues , like the need for brakes and rotors and the fuel leak , and i planned on replacing all the fluids and filter but it's starting to get ridiculous since i'm on a budget.

    so far i've replaced or changed...
    oil and filter
    coolant (flushed), thermostat, pressure cap, top radiator hose
    brake fluid , pads, rotors , emergency brake cable
    transmission fluid, filter , trans coolant line
    headlights and tailight assemblies
    supercharger oil

    things i know that need replaced that's not done yet...
    fuel line from engine to filter
    sway bar
    tie rod end
    power seat switch
    rear view mirror

    things that still need investigated...
    heater doesn't work (any speed)
    DIC not working
    hud not working
    ABS light on (cleaned sensors but don't know if that fixed it yet)
    SRS light on.
    one fog light not working
    Last edited by EHB; 12-19-2014 at 06:31 PM.
    Reply With Quote  
     

  2. #2 Re: brake bleeding question 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,927
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  3. #3 Re: brake bleeding question 
    Donating Users EHB's Avatar
    Join Date
    Dec 2014
    Location
    Maryland
    Posts
    843
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    Quote Originally Posted by Scottydoggs View Post
    i just called my buddy and and asked him about the fuel line fix kit... he said it's so rusted it's beyond fixing it needs replaced... the new one is going to cost me about $160.
    Reply With Quote  
     

Similar Threads

  1. Question on bleeding CTS-V Brakes
    By 92builtbird in forum Brakes/Suspension/Chassis
    Replies: 4
    Last Post: 09-12-2014, 07:18 PM
  2. brake part question not completely noob question!!
    By Lastremanent in forum Introductions/Noob Questions
    Replies: 3
    Last Post: 06-11-2013, 05:18 AM
  3. Bleeding a 3.1L
    By Matt Beauchamp in forum 3.1L V6 (LHO/LG8)
    Replies: 5
    Last Post: 05-13-2012, 04:37 PM
  4. Brake Bleeding Procedure
    By SJAndrew in forum Brakes/Suspension/Chassis
    Replies: 1
    Last Post: 08-12-2010, 06:20 PM
  5. 1992 Grand AM Brake Bleeding help
    By rmacinc in forum Brakes/Suspension/Chassis
    Replies: 8
    Last Post: 01-23-2009, 09:51 AM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •