|
|
03-02-2014
Hey guys i have not posted on my grand prix in a while, but i have a question about about this guyis their suppost to be a vac line to that, is it suppost to be blocked off, or is it suppost to stay like that?
Also when I was at Dmacc (community collage) the other day I came out side and see this........
03-02-2014
that port used to have a foam cap on it. its fine like that. most of us have lost it already. its supposed to be open.
03-02-2014
Ok thanks man, just wanted to know if i had a vac leak or not.
03-02-2014
your good to go, except for the dick that hit and ran you.
03-02-2014
Yeah I know its bull sh*t, i asked the if they had video of it, and the front desk person said none of the cameras on the out side of the building work! I was like DA F*CK
03-09-2014
Has any body used the "Quickchange Fuel Pump" from the wbody store? If so is it anygood? Also what fuel psi should I be running at. My car is running 45 psi.
03-09-2014
I got the quick change one probably six months ago and so far so good.
Originally Posted by BoostenGTP
03-15-2014
put my gtp emblem on the back.
03-15-2014
Made "GTP" emblem out of my pregen emblems
A little wire and tuck mod still needs cleaned up
Rust got so bad the "side skirt" fell off ):
03-15-2014
Man I would have been livid if they couldn't find out who did that to my car
Originally Posted by theaceofspades
03-16-2014
it still pisses me off and the rust just tops it. And the tail lights my dad broke the covers off for being tinted, after i got a fixit ticket!
03-23-2014
I added the aux mod to my radio tonight but it wont work, i used the write up on here. Do I need to have a cd in? If so then im SOL because im getting the e20 code when i Put a cd in!
03-23-2014
yes, you would need a cd player to work, and one be in the radio. you could try tapping the radio wires. seen a post where a guy used them due to the cd not working. its the same line of wires you tapped for the cd.
http://ls1tech.com/forums/stereo-ele...dapter-26.html post 505 and 507
03-23-2014
ok thanks i will check that out.
Last edited by GrandPrixgtp2000; 03-23-2014 at 06:50 PM.
03-28-2014
when you move your coil paks and ICM do you have to move the metal plate under it with the 3 gold boxes?
04-04-2014
almost done moving my ICM to the fire wall. Just have to finish some wiring.
04-04-2014
I'm interested in seeing some daytime pictures!
Originally Posted by BoostenGTP
04-04-2014
After I get everything cleaned up and wires tucked I should have a picture tomorrow. I'm done for the night though.
04-04-2014
And I need to get thicker wire covering
04-05-2014
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
