image.jpgimage.jpg
The first is the passenger side light, as you can see (barely, sorry) by the screwdriver tip there is a slight raise in the reflector grid by the bulb base.
The second is the drivers side, again by the screwdriver tip, you can see that the reflector grid is almost flush with bulb base.
At least hopefully you can see it, I know they are sucky pics, but was taken and uploaded with my phone. Sorry. Basically that raise in the grid by the base on the passenger side doesn't allow the projector to align correctly like on the drivers side housing. Just want to make sure hopefully that the TYCs don't do the same thing, want them to be at least identical, whether it be raised or flush, just want them to be the same to make both projectors align like the other.
