Simple Intake (pictures)

**Scottydoggs** · 07-27-2013

i used gorilla glue to set the sensor in.

**Kilroy** · 07-27-2013

I would like to retain the ability to remove it in one piece.

Sent from my Galaxy Nexus using Tapatalk 2

**REDCRAPGP** · 07-27-2013

Silicon?

**91parkave** · 07-27-2013

You could put it in the rubber coupler portion cut a a small x and press the iat in.

**Kilroy** · 07-27-2013

I think I trust the grommet idea a bit more. probably go with that.

**DirtDog** · 07-27-2013

U guys are over thinking CAI's & HAI's

**Scottydoggs** · 07-27-2013

ive had mine out since, re glued it back in. gorilla glue will break free, with easy really. you only use a small amount.

**ItsMeDc** · 08-16-2013

Anybody who painted theirs with the night temp paint use primer? Any problems with the paint flaking off or not sticking well?

**Scottydoggs** · 08-16-2013

straight rustolium. i did sand the pvc with 100 grit sand paper and took a knife to the mold seams to smooth the outside of the pvc.

then hung it with a string and a pencil, then sprayed it with many light coats waiting 10 minutes in between coats. first coat was nothing more then a dusting, more of a tack coat.

**Scottydoggs** · 08-16-2013

**ItsMeDc** · 08-16-2013

Originally Posted by Scottydoggs

straight rustolium. i did sand the pvc with 100 grit sand paper and took a knife to the mold seams to smooth the outside of the pvc.

then hung it with a string and a pencil, then sprayed it with many light coats waiting 10 minutes in between coats. first coat was nothing more then a dusting, more of a tack coat.

Thanks a bunch! I plan on taking a knife and trying to smooth it out as well. Picked up some Rustolium high heat ultra.

**onetyme77** · 09-17-2013

Has any one else been having trouble with there intakes staying on the pvc? I have tighten and tighten and tighten the crap out of the clamp, I have even changed the clamp, but it always manages to come off. Any solutions out there?

Sent from my SCH-I535 using Tapatalk 2

**Scottydoggs** · 09-17-2013

mine fell off a few times, then it just stopped falling off. im still using the crappy clamps that came with the coupler too. seems like it need a bunch of heat cycles till it stay put.

**onetyme77** · 09-17-2013

It's been like a year and it still wiggles off! I'm so fed up with it I'm putting the stock setup back in. Plus ever since I put the open filter on my car sounds like a 4x4 when it slows down, u know that roaring sound 4x4 tires make?

Sent from my SCH-I535 using Tapatalk 2

**ILoveAudi** · 09-17-2013

Originally Posted by onetyme77

It's been like a year and it still wiggles off! I'm so fed up with it I'm putting the stock setup back in. Plus ever since I put the open filter on my car sounds like a 4x4 when it slows down, u know that roaring sound 4x4 tires make?

Sent from my SCH-I535 using Tapatalk 2

But you know that whine the blower makes with the open cone? Blower whine > Sounding like a 4x4

**Scottydoggs** · 09-17-2013

Originally Posted by onetyme77

It's been like a year and it still wiggles off! I'm so fed up with it I'm putting the stock setup back in. Plus ever since I put the open filter on my car sounds like a 4x4 when it slows down, u know that roaring sound 4x4 tires make?

Sent from my SCH-I535 using Tapatalk 2

is your car n/a? cause i dont have that sound. you get new tires or something since the intake?

**onetyme77** · 09-17-2013

No its not super charged, and honestly, Idk if I got my tires before or after I did my intake. At first I thought was my brakes, but I don't have to hit my brakes to hear it, and it's only at very low speeds or when I'm slowing down.

Sent from my SCH-I535 using Tapatalk 2