after that was done it was time to tackle the windows...
i thought i had some experience because i changed out the driver's side motor and regulator but these were a bit#$ because the passenger side was secured with sheetmetal screws and I couldn't figure that out for like about 5 mins of head scratching...
after i installed the motor on the passenger side the switches were installed I tested the switches and i noticed that if you press on the up side the window goes down and if you press on the down side the window goes up, which is completely opposite of the fron switches, i fooled with the switches a bit to see if i could just switch the switch orientation but i couldn't the actual switches are too long for the covers to snap into place,
oh well at least my windows work properly now...
