There are plastic tabs holding the switch assembly to the plastic piece. Just pull them away from the switch
Look on the underside of the piece the button slides out through the bottom
|
There are plastic tabs holding the switch assembly to the plastic piece. Just pull them away from the switch
Look on the underside of the piece the button slides out through the bottom
magnus, what are the specs on the LED's you used?
I just got some that are:
- red super bright LED
- 2,000 mcd output
- 1.8V @ 20mA
- 15° Viewing angle
I used 1W, 680ohm resistor (couldn't find any 1/2W 680ohm), and they aren't as bright as I was hoping for.
« Previous Thread | Next Thread » |
Tags for this Thread |