zzp stage 2?

[daytonagtp23]

hey i was just wondering if anyone has the zzp stage 2 performance kit? is it worth getting? my car is basically stock besides a cheap open cone air intake.

[matt5112]

If you want to blow the front bank of pistons, yes.

Read this: http://www.grandprixforums.net/f81/s...car-17482.html

And post in the correct section next time.

[ls6velless454]

Well my car is bone stock, and I'm just glad I found this forum before I started throwing money at those people. Honestly it's not worth it you get no discount for buying several parts and they generally charge more than other vendors. Go to advance auto parts get some 104's and a 180 t stat. Then go to some hardware store and get parts for fwi (fender well intake) there is a writeup on that. IDK man you don't need the kit you can do it way cheaper on your own parting it together by the way I have a 3 inch catless dp for sale if you want that. It will eliminate the u bend and cat, unless you plan on running headers.

[blueguy]

^^104's are too cold of a plug for a stock pulley. They are for a basic 3.4" setup. You want to run the hottest plug you can get away with...so in his case...I'd say Autolite 605's. And keep the stock T-Stat until you get a tuned PCM...because it'll do you no good without a tune and the fan turn-on turned down temp wise.

Again...READ MY THREAD.

[Ibwrong]

Well my car is bone stock, and I'm just glad I found this forum before I started throwing money at those people. Honestly it's not worth it you get no discount for buying several parts and they generally charge more than other vendors. Go to advance auto parts get some 104's and a 180 t stat. Then go to some hardware store and get parts for fwi (fender well intake) there is a writeup on that. IDK man you don't need the kit you can do it way cheaper on your own parting it together by the way I have a 3 inch catless dp for sale if you want that. It will eliminate the u bend and cat, unless you plan on running headers.

Not to hijack the thread, what do you want for you DP?

[TheyCallMeSteel]

I don't but i like ZZP.

[blueguy]

You don't what?

[blowfishRus6]

they dont know, there mezmerised by them boobies

[superv6]

ha! thats what im sayin.

[badbrad]

go get some autolite 105's (or 605's) can't remember, cheapest one, try .060 gap, get a 180* t-state. search our "for sale" threads and save youself some $$$$.

[crashgtp]

lol @ blowing pistons

[CrazyGuy03]

togs 3" downpipe 3.4 pulley 104's and tune

[copperpacecar]

togs 3" downpipe 3.4 pulley 104's and tune

whats a tog and where do i get one

[Bio248]

TOGs are a set of headers (the other guys). they are very expensive for what they are, but are commonly refered to as one of the best sets of headers you can get for our cars. i dont like them because of their 3 piece design.

[copperpacecar]

well if u dont like togs what would u suggest for a good set of headers for the money?

[Bio248]

S&S or SSAC, S&S will be more expensive, but i think they are the best designed headers for our cars. SSAC are redone SLP knockoffs that are actually very well made.

[copperpacecar]

sorry to be a pain and keep asking but what r ssac and where so i buy them?