ZZP or Intense Transmission settings for 00+ bonnevilles

**oldsman105** · 09-10-2014

I currently have a ZZP 1.0 pcm in my car. I love the way the transmission settings are . I wanted to edit the pcm but the power tuner doesn't recognize the file. Does anyone have a bin that I can copy over the parameters on to a compatible bin file?

Thanks in advance

**BillBoost37** · 09-10-2014

Ask Sparky for Dropbox link or send me your email, or find the thread where I linked it like this
https://www.dropbox.com/sh/npa8brtuz...j_Kzk9jKa?dl=0

**BillBoost37** · 09-10-2014

ps..if you want better trans settings.. lmk. I have amazing settings that have Scottydoggs thrilled with his car.

**oldsman105** · 09-10-2014

I found a 2000 ssei intense Bin in your Dropbox. My damn DHP wont open it either

. Yes I would gladly like better transmission settings!!!!

**BillBoost37** · 09-10-2014

take the 00 regal settings under my last name in the last file before I went L26

**Scottydoggs** · 09-10-2014

this bin is what i used for the trans settings. its the 3 rd one from the top in 2000 regal in the bills name folder.

2000 GS L26 L67 TB Inj.bin

**BillBoost37** · 09-10-2014

A direct link.. geez..that's nearly perfect

**blueguy** · 09-10-2014

.01 second shift times.

100% line pressure.

6k RPM shift points.

All you need to know.

**oldsman105** · 09-10-2014

what about skip shift :P

Thank you bill and scottydoggs, i will be working on the file today !

**BillBoost37** · 09-10-2014

You will like it

**Scottydoggs** · 09-10-2014

oh that bin does the skip shift. it pops into 1 st gear real easy like at low speed light throttle around turns and stuff. then floor it and it has zero thoughts about going anywhere but first gear lol

its a nice tune. after the tune, perf shift off feels better then perf shift on did when stock too.

**BillBoost37** · 09-10-2014

Scott..you could increase your pressures and stuff on perf to make it snappier

**oldsman105** · 09-10-2014

Welp I'm having a problem writing to the PCM (I'm using a spare used pcm and a off board loader as the last time I tried it on my car it bricked) when I go to load the file the PCM will not reboot and wont write.

Tried to edit title of thread to reflect my issue but haven't figured out how to do it with this forum software :P

**Scottydoggs** · 09-10-2014

bricked means it dead. cant read or write it any more, car wont even run.

you'll need a spare pcm.

i got a spare 01 gp pcm that wont work in my 98, not sure if it will work in a bonnie or not.

ive got it listed for sale. if some one can confirm if it will work i can flash a bonnie bin and your vin # and the trans tune and delete what ever codes you like.