Thread: Can't get my DHP registered

I'm gonna buy a new usb to serial adapter in the am and try that and see if I'm gonna meet up with my friend.. If I get this cable install the driver etc I'd assume it's the DHP but like I said I had it working before the driver got messed up so I have faith that it's the cable! If not I will have my friend hook my DHP in place of his and see if it works

OK so! I bought the USB to serial adapter this morning http://www.staples.com/Staples-USB-t...product_837560 this one to be exact. No where around here sells the Keyspan anyway so I hooked it up installed the driver. Connected the DHP to the car/PC and did the interface registration and guess what! It failed the same exact way! So before I snap out I messed with the speed settings on the COM 3,4,5 and 7 in said order. Once I got to 7 I did the registration and was looking at something besides the computer cause I figured it would fail anyway. I turn back around to retry it and it says "Registration Complete" for a moment I was like wtf? What just happened? So I go to read my PCM and it doesn't work over and over I try (97 GTP not 01 GT) so I was like let me start the car it's like 100 degrees I'm sweating and I will try to scan live data see if that works. So I scan and it works fine so I'm like hmm why won't it read my PCM it's a ZZP PCM but was edited with DHP by a friend a few months ago so it should read! But either way I tried like 4 times and the switched it to "force upper case VIN" and bam it worked! Now I'm not sure as to why that helped BUT it did so now everything so far KNOCK ON WOOD!!! Is working good so if you're having the same "Interface Registration" issue I suggest a few things.

1. Check speed settings (COM on the computer end, DHP software).
2. If you have a cheap USB to serial adapter get either Keyspan or the one I posted above.
3. Try ALL your USB ports with all speed settings.
4. Check, reinstall drivers for your adapter if you don't have the actual adapter drivers download several and keep trying.

This was on my HP laptop with Windows 8.1, 64 bit, Powrtuner Software v1.2.4, 115,200 speed.

congrats!!!! persistence pays off.

i know what a pita it can be get it done. but like i said earlier, when it does register that progress bar means jack, it happens fast.

Originally Posted by Scottydoggs

congrats!!!! persistence pays off.

i know what a pita it can be get it done. but like i said earlier, when it does register that progress bar means jack, it happens fast.

yes and thanks to everyone who helped.

You got it jdmgtp? I don't think your unit is trash just it's very picky

Originally Posted by jdmgtp

yes and thanks to everyone who helped.

so Darkhorizon was able to figure it out for ya? if so good deal.

So we both had a bad cables smh well at least it didn't take 2 weeks lolol

yup, less than 2 weeks to get it right don't sound to bad.....you guys had it easy lol

Oh yea? I found a place that sells them cheap if you want it

the one i have must be old as sh-it, cause theres no red light on the box.

I didn't realize it either till I was checking the wires etc but I don't know if they all have it

Originally Posted by 231FUN

fortunately my registered like a charm first time, it however had been a one owner unit that had been meticulously cared for and still looks brand new.(Thanks Foghorn!)

If you hang out with Paul at times, tell him I said hi. On a side note....I've touched that cable, so there's at least a couple of fingerprints on it.