Thread: 01 grand prix .bin file

I am looking for a stock 01 grand prix .bin file and a gtp .bin file so that i can cross the two for my up coming top swap tune.

Look at the sticky posts here, or on the tuning section over at clubgp.com, or at bonnevillepro.com.

I tried the bonnevillepro but i dont see a section for grand prix's it seems like they have every other 3.8 but this one.

Use the GTP bin and call it a day.

But wouldn't i still need to transfer over the transmission settings?

Yes.

But that way you can use the L67 MAP and log boost levels.

okay so does anyone have a gtp bin i can use?

Originally Posted by darkhorizon

Look at the sticky posts here, or on the tuning section over at clubgp.com, or at bonnevillepro.com.

this

Im not seeing anything on either site...

nevermind thanks for the help!!!

This may sound stupid but how do i view these files after i open it some im new to tuning so i want to get as much info before i attempt to tune a car.

I would suggest you do it the way you had planned orginally. Transfering over the fueling is usually a bit easier than trying to get the transmission to operate correctly... If you have HPT you cant swap files anyway.

What would i use to swap files? Do i just need to transfer the fueling? What about torque management and the boost and stuff?

L36 bins dont understand boost or S/C's so as per darks suggestion: don't give a **** and run an L36 MAP sensor somehow.

there is no torque management to move over. You keep the 1 bar map sensor on it. L36 bins "understand" boost just fine, you just need to command a richer AFR in boost, and change the point at which the motor switches to power enrichment mode through the PE enable throttle position table. Boost control solenoid is pointless, so you dont need to mess with one of those, and just run the bypass valve in manual mode.

I think im just going to find someone local in Illinois to tune it for me. But thanks for the help and yea i found them after i registered.