Thread: How to hook up a Innovate LC1 to a HPT PRO w/ inputs???

Run the 5v out put of your wideband controller to the hpt interface and then set up a pid with a converter to switch the voltage to afr.

Not to sound like an idiot, but can you be alittle more clear to me? LOL. I seriously suck at this stuff, i'm not going to lie.

BTW, I was about to shoot you a PM about your other thread.

Thanks!

I used the HPT site where they have it all detailed out to do this same thing on mine. You'll need a ground from the same place as the W02 and the 5V, setup properly and then add the pid to HPT.

Originally Posted by BillBoost37

I used the HPT site where they have it all detailed out to do this same thing on mine. You'll need a ground from the same place as the W02 and the 5V, setup properly and then add the pid to HPT.

Got a link to this thread? Like I said i've looked and I couldn't find anything that was clear. I understand you need to ground it and tap the brown wire (IIRC). How do I setup the PID?

Thanks...

I searched and came up with three pages. One referenced 7.35 as the slope IIRC. Give it another try.