Thread: Transient???

Results 1 to 5 of 5
  1. #1 Transient??? 
    SE Level Member chrisrexmandie's Avatar
    Join Date
    Sep 2018
    Location
    NC
    Posts
    110
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Ive been looking through my tune file too see why my air fuel ratios are not wanting to sit where commanded. Could anything in this tab be causing my issues?
    Transient - Album on Imgur
    Reply With Quote  
     

  2. #2 Re: Transient??? 
    Donating Users bandook's Avatar
    Join Date
    Apr 2015
    Location
    Columbus, OH
    Posts
    1,781
    Thanks (Received)
    2
    Likes (Received)
    27
    Dislikes (Received)
    0
    Are you talking wot? What's the issue exactly? Transients are more for tip in and tip out, at least that is my understanding. I'm still trying to read up on it but it's hard making sense of where you would start tweaking or exactly how the values change a tune.

    All you should need will be on the PE fuel tab and then just tune your MAF using a wideband.
    Top Swapped 01 Imp
    VS (very small?) cam, SD Headers, 2.8" pulley, 29°, ported everything, E85, AEM water/meth, Deka 60's, HPT tuned
    Reply With Quote  
     

  3. #3 Re: Transient??? 
    SE Level Member chrisrexmandie's Avatar
    Join Date
    Sep 2018
    Location
    NC
    Posts
    110
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Yes WOT sorry. My PE tables are set to 11.5 but the commanded afr I see in hpt is always in the low 10s I'm not sure why .
    Reply With Quote  
     

  4. #4 Re: Transient??? 
    Donating Users bandook's Avatar
    Join Date
    Apr 2015
    Location
    Columbus, OH
    Posts
    1,781
    Thanks (Received)
    2
    Likes (Received)
    27
    Dislikes (Received)
    0
    Oh the commanded is showing 10's? What about the other tables in PE tab? There are adders there. I've zeroed all of them out. Unless there is something weird going on, commanded should stick where you set it. I set PE to 11.4, but in the log commanded will show 11.3 for some reason, but it's only 1 point off ever.
    Top Swapped 01 Imp
    VS (very small?) cam, SD Headers, 2.8" pulley, 29°, ported everything, E85, AEM water/meth, Deka 60's, HPT tuned
    Reply With Quote  
     

  5. #5 Re: Transient??? 
    Turbo is the way to go. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    21,022
    Thanks (Received)
    21
    Likes (Received)
    45
    Dislikes (Received)
    0
    Yep, sounds like you are missing the add vs rpm table that will lower the commanded AFR value.

    Past that you have a commanded value that you need to match the actual using the wideband. You'd be adding/removing fuel from the MAF curve to make that match.

    SMGPFC Member #1
    Reply With Quote  
     

Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •